Heat Pump Tripping the Breaker: Why It Happens and When to Stop Resetting
A breaker that trips again is detecting a real fault. What the timing of the trip tells you, and why repeatedly resetting one is dangerous.
Continue readingConnect this button to your email provider (Mailchimp, ConvertKit or Beehiiv) to start collecting subscribers. The form endpoint goes here.
Error codes, strange noises and what you can safely fix yourself.
A breaker that trips again is detecting a real fault. What the timing of the trip tells you, and why repeatedly resetting one is dangerous.
Continue reading
Water pooling outside during winter is usually normal. Water anywhere near the indoor unit is not, and one cause accounts for most of it.
Continue reading
Some alarming noises are the system working correctly. A few are warnings you should not run through. The difference is usually easy to hear.
Continue reading
Aux heat costs several times more per unit of warmth than the compressor. Four settings decide when it engages.
Continue reading
Frost that clears on its own is normal. Ice that keeps growing means the defrost cycle is not running, and that is a fault.
Continue reading
Set to cool and getting heat means the refrigerant is flowing the wrong way. Two causes account for nearly all of it.
Continue reading
Type a fault code from a Mitsubishi, Daikin, LG, Fujitsu or Carrier system and see what it points to, what you can check yourself, and when it needs a technician.
Open the tool
What you can read depends on your control platform. Infinity reports numbered faults on screen; conventional systems blink an LED inside the panel.
Continue reading
Most Fujitsu indoor units have no display, so the fault arrives as two lamps blinking. Knowing how to read them matters more than the code list.
Continue reading
Every compressor start is the hardest thing your system does. A heat pump that starts and stops every few minutes is shortening its own life.
Continue reading
Start from the symptom you actually have. Each section gives you the two-minute version, then links to the full diagnosis.
Continue reading
A heat pump that will not start is usually something small. Fifteen minutes of checks, in the order that finds the cause fastest.
Continue reading
Your heat pump periodically stops heating your house to melt ice off the outdoor coil. Nearly everything alarming about that is the system working correctly.
Continue reading
Most burning smells are dust cooking off the heat strips and clear on their own. A few are electrical faults that need the breaker off now.
Continue reading
LG shows faults as CH codes, or as blink patterns on units without a display. The numbering is not consistent across product families.
Continue reading
Daikin codes are a letter plus a number, and the letter tells you which subsystem is complaining. That makes them easier to triage than most brands.
Continue reading
Aux heat costs 2 to 5 times more to run than your heat pump alone. Here is when it running is normal, and when it means something is actually wrong.
Continue reading
A soft reset from the thermostat, a full power reset from the breaker, how to find a dedicated reset button, and when a reset is the wrong move.
Continue reading
Start with the two possibilities that are completely normal, then work through the five that are not. Most cases resolve without a service call.
Continue reading
Mitsubishi reports faults as two-character codes and as LED blink patterns. Here is how to retrieve a code and what the major families of codes point to.
Continue reading
A light coating of frost in winter is expected. A block of ice encasing the coil or ice on the top of the unit is a problem you should not ignore.
Continue reading
Equipment brand accounts for a small share of how your system performs. Installation quality accounts for most of it. Screen the installer harder than the box.
Start with the two possibilities that are completely normal, then work through the five that are not. Most cases resolve without a service call.
Mitsubishi reports faults as two-character codes and as LED blink patterns. Here is how to retrieve a code and what the major families of codes point to.
A light coating of frost in winter is expected. A block of ice encasing the coil or ice on the top of the unit is a problem you should not ignore.